How to turn your iXm Recording Mic on + off

How to turn your iXm Recording Mic on + off


To turn on your Yellowtec iXm Microphone
you have to press a combination of two buttons. And these buttons are the STOP button
on the Playback Keypad in combination with
the REC button on your Dashboard. Once you pressed this combination,
the REC LED will flash green. That indicates that the boot sequence started. This boot sequence is followed
by a red flashing Memory LED. This whole booting sequence can take up to 15 seconds. It depends on your memory capacity. We recommend eight Gigabytes,
because that is totally enough. If you have no SD Card inside,
the Memory LED will flash red continuously. To switch off the microphone you again have to use the combination of two buttons. And that is again the STOP button on the Playback Keypad, but this time with the STOP button on your Dashboard. Once you pressed this combination, all LEDs will turn off
and that means your iXm is powered down. But there are certain situations
when you can’t switch it off. For example while recording, while you have a connection to your PC or while charging. If you have forgotten the combinations, don’t worry! We printed them at the bottom end of you iXm Microphone.

Leave a Reply

Your email address will not be published. Required fields are marked *